30
ANGEL iR3
TM
contents
important safety
guidelines
operating instructions
external LCD menus
whilst in SAFE
external LCD C.O.P.S.
menu whilst LIVE
internal tournament
LCD menus
figures
maintenance
fault finding tables
useful conversions
warranties
update info
your ANGEL iR3
TM
maintenance
The low-pressure regulator controls the pneumatic cycle of the ANGEL iR3
TM
and is located in the left-
hand chamber at the front of the ANGEL iR3
TM
body. The pressure needs to be at 95 psi (6.6) output at
a pressure of 500 psi at the second stage regulator.
LPR adjustment is achieved by the removal of shims. Each shim equals approximately 3.5 PSI/0.2 BAR.
We recommend the use of the optional service tools and lubrication of parts with LOVE JUICE
EXTREME GREASE only (see general assembly diagram).
• Ensure the ANGEL iR3
TM
is degassed and in SAFE mode
• Remove the left end cap using suitable metric 4.0 A/F Allen key
• Insert the optional pressure gauge adaptor into the hole that the end cap was removed from.
• Re-Gas the ANGEL iR3
TM
and switch the ANGEL iR3
TM
to LIVE.
• The ANGEL iR3
TM
is live and capable of discharging.
Fire 6 shots with no paintballs present to stabilize the LPR pressure.
Note the pressure reading. Should the reading be high or low proceed to the next stage.
• Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL iR3
TM
before disassembly.
• The ANGEL iR3
TM
can hold a small residual charge of gas, typically 2 shots, with the first stage regulator
removed. Always discharge the marker in a safe direction to relieve this residual gas pressure.
• Ensure the ANGEL iR3
TM
is degassed and in SAFE mode
• Remove the pressure gauge adaptor and insert M 2.5mm or piston extracting tool (optional extra) into
the brass piston and withdraw slowly.
CAUTION:
• Ensure the springs or shims are not lost (see LPR assembly). Insert/remove shims as necessary.
Each shim equals approximately 3.5PSI/0.2BAR.
• Replace springs in correct order onto the piston (see LPR assembly).
• Re-insert the piston ensuring that it is located correctly.
• Verify the LPR pressure, following the procedure described above.
• The ANGEL iR3
TM
is live and capable of discharging.
Once the desired pressure has been achieved proceed to the next stage.
• Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL iR3
TM
before disassembly.
•The ANGEL iR3
TM
can hold a small residual charge of gas, typically 2 shots, with the first stage
regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure.
• Ensure the ANGEL iR3
TM
is degassed and in SAFE mode
• Remove the pressure gauge adaptor & replace the end cap.
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals